Why pay hundreds to a dealer if you can get this much cheaper!

That's how your car will look like after installing our dash kit.

Each dash kit could be made of different color!

About the dash kit

In the ld Days the presence of genuine wood would distinguish British-made cars from their American counterparts. The accented dashboards of Jaguars, Riley's, Bentleys, always had that lassy Look.In later years, wood became available in the United States but the method employed was labor intensive and costly. Artisans cut thin pieces of timber to certain shapes and then would hand stain each individual piece, rubbing and polishing until the finish was deep and rich. These wood panels were then fixed to the dash with screws and pins. This process caused wood accented dashboards to be a very expensive option, usually costing $1,000-$1,500, and generally offered only through new car dealerships. The breakthrough occurred when 3M developed a double-sided adhesive tape that was then used to affix each piece of wood or synthetic veneer to the dash. Not only was the installation time dramatically reduced, but also the new process was so easy that anyone could do it without professional assistance. Today wood veneers are completely affordable and an easy do-it-yourself item. A wood accented dash is just as Classy and Beautiful today as it was in the old days. BDTrims is the product from Bodydash, Inc.

Installation Instructions

	.:Step 1:. Thoroughly clean the application area with alcohol swaps (included in the package) to remove any traces of silicone treatments or dirt. Repeat the cleaning process using a clean , lint-free cloth as many times as necessary to remove every trace of dirt or protectant.
.:Step 2:. Dry-fit each dash trim piece, note correct placement, and use a pencil to outline the pieces for placement reference.
	.:Step3:. Carefully apply 3MAdhesive Promoter (included in a package) to all surfaces that will be covered by dash trim.
.:Step4:. Gently heat the trim parts with a heat gun, or by placing the kit pieces (tape liner side down) on top of the defroster with the setting on medium to high.
	.:Step5:. Begin peeling back the liner of dash trim part before applying the part. Handle parts from edges to avoid finger contact with the adhesive.
.:Step6:. Carefully position the part and peel off the remaining liner.
	.:Step7:. Thoroughly press down on the entire surface of the part to ensure complete wet-out of the adhesive to the surface.
.:Step8:. Properly installed, dash trim adds a distinctive touch of class to the vehicle. Enjoy our product.

Enjoy our products!

If you have any question, please contact us!

For more products please visit our website at:
www.bdtrims.com

Our E-Mail: ebay@bdtrims.com

Check out our feedbacks!

User:mints2fresh( 11)  Date:Sep-29-08 04:34:03 PDT Praise: great

User:mints2fresh( 11)  Date:Sep-29-08 04:33:28 PDT Praise: great

User:accord9111( 22)  Date:Sep-27-08 00:15:05 PDT Praise: thank you, every thing is perfect

User:goldteeth1971( 54)  Date:Sep-16-08 03:14:25 PDT Praise: i have recieve my products and it was in perfect condition fast shipping

User:apache*214( 208)  Date:Sep-08-08 19:56:56 PDT Praise: Thank you just as promised..

User:alex22mejia( 7 )  Date:Sep-08-08 11:30:32 PDT Praise: excellent, as descrived

User:by_request_entertainment( 79)  Date:Sep-07-08 23:45:46 PDT Praise: I was very happy with my Item shipping, cost and delivery

User:nanabutton3( 180)  Date:Sep-06-08 12:00:07 PDT Praise: fast delivery

User:rbomer69( 67)  Date:Sep-05-08 21:33:57 PDT Complaint: Product not as advertised, they did not refund full amount, do not buy from here

User:chamaquitopr( 6 )  Date:Aug-29-08 15:09:31 PDT Complaint: they sent me the wrong pieces 2 times

To see all feedback for this member, go to the Member Profile page.